Accessories for Pressure Transmitters

1-Way Manifolds

for direct or pipe mounting between process and gauge pressure transmitters or pressure gages

• Operating pressure up to 42 MPa

• Operating temperature up to 500 °C

• Material stainless steel 1.4541

• Sealing component selection from different material: Graphite, PTFE, PEEK, Viton, EPDM

• Gland packing adjuster

• Seat diameter 4 mm

• Certificate ES for type revision acc. to 97/23/ES

• Application as pressure accessories acc. to Directive of government, No. 26/2003 Coll.

2-Way Manifolds

for direct or pipe mounting between process and gauge pressure transmitters

• Operating pressure up to 42 MPa

• Operating temperature up to 500 °C

• Material stainless steel 1.4541

• Sealing component selection from different material: Graphite, PTFE, PEEK, Viton, EPDM

• Gland packing adjuster

• Seat diameter 4 mm

• Certificate ES for type revision acc. to 97/23/ES

• Application as pressure accessories acc. to Directive of government, No. 26/2003 Coll.

3- and 5-Way Manifolds

for direct or pipe mounting between process and differential pressure transmitters

• Operating pressure up to 42 MPaOperating temperature up to 500 °C

• Direct installation on a pressure sensor or between impulse piping

• Sealing component selection from different material: Graphite, PTFE, PEEK, Viton, EPDM

• Gland packing adjuster

• Seat diameter 4 mm

• Drain piping on the side of the manifold body enables arbitrary position of the manifold

• Certificate ES for type revision acc. to 97/23/ES

• Application as pressure accessories acc. to Directive of government, No. 26/2003 Coll

Oriffices

we offer orifices, chamber and spot measuring nozzles with metering runs.

• Nominal diameter DN50 to DN1000 for spot extractions

• Nominal diameter DN50 to DN300 for chamber extractions

• Nominal pressure PN6 to PN250

• Material of straight sections P235GH, E355SR, 1.4541

• Material of disk 1.454

• Optional length of straight sections

• Optional versions of connection sections

• Meets requirements EN ISO 5167-1 and EN ISO 5167-2

• Certificate according to Directive PED97/23/ES.